Worktop design and quotation in Roehampton

Yes. Roehampton is on the patch, and the postcodes we work here are SW15. It is run from the New Malden side, covering South West London & Surrey. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Many have been extended at the rear since being sold, so the kitchen is half original and half newer with a floor junction between the two. Kitchens in this stock are usually compact and reasonably square, so total area is modest — but the fixed lines do not shrink with it. You see it before you commit to anything. In the tower and slab blocks the lift car depth is the hard limit — anything over about 2m has to be cut to fit the car, so the joint position is decided by the building, not the kitchen.

The slab blocks are set back from the road behind landscaping with long approach paths, controlled entry and lifts that are undersized for stone, and the upper floors make a stair carry impractical. Booked lift access and an early slot are essential. Where the lift will not take the longest run we design a join in rather than gamble, because a piece that will not go up has to go back on the van. An access-driven join is priced like any other join, and people are always surprised to see one on a dead straight run. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop fabrication. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so.

Peninsulas frequently land on a lightweight partition or on units that were never fixed down, and stone needs proper support under it before it goes on. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Every line has a reason next to it.