Worktop design and quotation in Roe Green

Yes. Roe Green is on the patch, and the postcodes we work here are NW9. It is run from the Watford side, covering Hertfordshire & North London. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Doorways are low and narrow, which is a genuine constraint on piece length before anything else is considered. If the island top is a few hundred millimetres longer than the usable length of a slab, you buy a second slab to gain that overhang — the whole slab, not the part you use — and that is a material decision worth more than any other line on the quote. That is what the itemised lines are for. Short runs in a conservation cottage leave no room for error, so a paper or laser template of the actual opening beats any drawing of nominal unit widths.

Narrow lanes, grass verges and shared front paths through the conservation area, with limited parking and no driveways on the original cottages, so the carry is on foot across grass and paving. A narrow entrance hall with a turn into the back of the house caps the longest piece we can physically get in, whatever the run itself measures. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

It is one of the three we do most here, behind worktop templating. Same template visit, same workshop, same installers either way. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly. Rear and side-return extensions are where the islands appear, and an island is the piece that decides whether one slab does the kitchen or two. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template.

Two parallel runs with a walkway between them is the most efficient shape there is on a slab, because both pieces nest as straight lengths with almost no waste. Each run is priced on its own line against the supply rate, with the join count and the reason for each join stated. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Window boards and cills stand proud of the plaster, so the back edge of the top has to be plotted to where the units actually sit rather than to the wall. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Photographs are worth more than a plan here. Send the island size including the overhang and which side people sit at, the stool count, and confirm the edge profile you want and which edges are to receive it. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Written to be read by whoever is paying.