Worktop design and quotation in Merton Park

Yes. Merton Park is on the patch, and the postcodes we work here are SW19. It is run from the New Malden side, covering South West London & Surrey. Unrestricted kerbside is straightforward as long as the space in front of the property is actually clear when the van arrives. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Handmade brick and lime plaster move visibly along a run, and a straight-cut back edge shows it immediately. If the island top is a few hundred millimetres longer than the usable length of a slab, you buy a second slab to gain that overhang — the whole slab, not the part you use — and that is a material decision worth more than any other line on the quote. Priced from the building, not from a rate card. Rooms here are rarely square — the original walls run out by 20mm or more corner to corner, so template the full room rather than assuming a 90 degree return at the dresser end.

Conservation area rules make skips and long-term van standing awkward, and the estate is characterised by clipped hedges and narrow gated front paths that a two-man carry cannot get a wide slab through squarely. The tram line splits the area, so the approach has to be planned from the right side of the crossing. Where the parking court sits behind the block the carry crosses open ground and gets boarded, because loaded trolleys and block paving do not agree. That is why the fitting line on a quote reflects manpower and time rather than square metres. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop templating and worktop installation. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Itemised, so it can be compared honestly. Extension kitchens are usually specified long before they are buildable, so the run lengths on the drawing and the run lengths in the room are different numbers. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

The stone carries the scribe because the wall cannot be persuaded, so back edges are cut oversize and eased in rather than dropped straight down. Send photographs of every corner of the room and it gets priced properly first time. Priced as fabrication, not as area. Send the island size including the overhang and which side people sit at, the stool count, and confirm the edge profile you want and which edges are to receive it. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. Nothing is payable until we template, so a quote can sit while consents and decisions catch up. Written to be read by whoever is paying.