Worktop design and quotation in Goresbrook

Yes. Goresbrook is on the patch, and the postcodes we work here are RM9. It is run from the Essex side, covering Essex & East London. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. Tell us at enquiry stage and it is priced properly, because a crew stood waiting is the most expensive thing on any job. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

These are small blocks with a single stair, no lift, and a communal door that will not stay open on its own. With little area to spread them over, the cut-outs and the fixed lines carry the quote, so each is listed on its own. You see it before you commit to anything. Modern infill units here are 560-570mm deep rather than 600mm, so the overhang is set on site once we see what has actually been fitted.

Straightforward estate streets north of the railway; the closer you get to the A13 and the industrial edge, the more the roads carry heavy traffic and the less sense it makes to unload on them. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template. Housings and integrated appliances are set out for a 38mm laminate top, so dropping to 20mm or 30mm stone changes the clearances and needs checking before anything is cut. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Itemised, so it can be compared honestly.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. The join count is stated with its reason. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Legs bottoming out on hard concrete or an uneven screed mean the tops of the carcasses are not one plane, and that is picked up at template rather than on fitting day. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Photographs are worth more than a plan here. Tell us whether there is side or rear access to the kitchen from outside, and send the run lengths with a photo of the window and boiler positions. An owner living in the house makes the decisions and lives with them, so the specification tends to go towards the material rather than towards the lowest total. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Written to be read by whoever is paying.