Worktop design and quotation in Benhilton

Yes. Benhilton is on the patch, and the postcodes we work here are SM1. It is run from the New Malden side, covering South West London & Surrey. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. Nothing here is added after the fact. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The bay at the front and the back addition at the rear were built to different standards, and the kitchen is nearly always in the weaker of the two. The second thing is the carry route: front door, narrow hall, a turn at the stairs and often a step down into the extension, which can mean a piece that would template in one length has to be split to physically get into the room. That is what the itemised lines are for. Boiler cupboards in the corner of these back additions are usually staying put, so we template around them and put the joint at the cupboard return.

Streets climb steeply from the town centre with parking on both sides and no off-street space on the terraces, so the carry is up a hill and then in through the front door. Door width, hall width and the diagonal at the turn are three separate measurements, and it is the diagonal that catches people out. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop templating and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A new extension slab is not automatically level, and that wants checking before templating rather than after the stone is cut. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Nothing payable until we template. The junction between the original room and the extension is the point to watch, because the two floors rarely sit at the same height. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Itemised, so it can be compared honestly.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Anything that has to stay accessible, a stopcock, a gas meter, a riser panel, is marked on the template so the stone is cut around it instead of over it. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Better on the quote than in a variation. Send us the run lengths, plus photos taken walking from the pavement through the hall to the kitchen so we can see the door widths and the stair turn. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Nothing payable until template.