Worktop templating in Thames View

Yes. Thames View is on the patch, and the postcodes we work here are IG11. It is run from the Essex side, covering Essex & East London. On a street with no restrictions the constraint is other residents rather than a warden, so it is worth putting a cone or a car out early. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. It goes on the job sheet for the fitting crew. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

An ex-council house is solidly built to a standard plan, with the kitchen at the rear and a back door next to it. Unit height is the other issue: legs sit on an uneven screed or hard concrete with no give, so the laser reads the top of every carcass rather than assuming they share a height. Two to three hours, once the units are in. Galley runs here are long and narrow, so a single continuous piece with a moulded drainer makes far more difference than any amount of cabinet upgrade.

Estate roads with parking courts and pedestrian-only paths between blocks, and the A13 severs the area from the rest of Barking, so getting in is a specific route rather than a general one. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. Door widths, turn diagonals and any change of level are recorded on the drawing alongside the run dimensions. It goes on the drawing with the run dimensions. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop installation and worktop splashbacks & upstands. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. The room as it is, not as it was drawn. Where kitchens turn over between tenancies the priority is a surface that survives a decade of being treated as a chopping board. The template visit is booked once the units are genuinely in, not when they are nearly in. The room as it is, not as it was drawn.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. A layout templated off one wall instead of one datum will not sit right once all the pieces are down together. One datum for the whole room. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A boxed soil stack or service riser in the corner of a run eats into the worktop depth and has to be scribed around rather than cut square. It is recorded on the drawing with the run dimensions so the workshop is not guessing. That is why the visit takes two or three hours. Every base unit fixed to the wall, packed and levelled with the laser, and any dry-lining or patching completed - the template reads the wall face it is given, so that has to be the finished face. A street with houses in single occupation next to the same houses cut into flats produces two completely different jobs from the same elevation. The template happens when the units are in, fixed and level, whoever is fitting them. Appliances on site, not on order.