Worktop templating in Royal Arsenal Riverside

Yes. Royal Arsenal Riverside is on the patch, and the postcodes we work here are SE18. It is run from the New Malden side, covering South West London & Surrey. Where the van can pull up level with the gate the pieces are handled the fewest times, which is what actually protects them. The templating visit needs somewhere to stop for two or three hours, which is a different problem from unloading for twenty minutes. The templater needs a proper stop, not a pause. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Dot-and-dab plasterboard bellies at a taped internal angle, so the run picks up a few millimetres over the last 300mm and a plan-angle mitre will not close. The template records that corner as it is, so the mitre closes tight instead of being cut to a theoretical 90 degrees. Two to three hours, once the units are in. In the listed blocks you often can't chase or drill historic walls, so upstands and end supports have to be carried by the units alone.

A gated estate with a barrier, controlled vehicle access and time-limited loading arranged through estate management; the listed conversions add restrictions on what can be fixed into original brickwork. The barrier, the entry code and the estate rules decide when a van can get near the door, and none of that is negotiable on the day. The templater measures that route on the same visit, so the drawing leaves site already knowing the maximum piece. It goes on the drawing with the run dimensions. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

It is one of the three we do most here, behind worktop replacement. Same template visit, same workshop, same installers either way. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. No stone is ever cut from a plan, which is inconvenient exactly when a programme is tight. Appliances on site, not on order. Handover-spec kitchens are square, plumb and predictable, which means the join count is honest and driven by run length rather than by the building. The template visit is booked once the units are genuinely in, not when they are nearly in. Units fitted, fixed and level first.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. The template records every angle in that shape as it actually is rather than as the plan drew it. The drawing leaves site complete. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

Dot-and-dab plasterboard sounds solid and is hollow behind, so anything fixed through it has to hit a dab or a batten rather than a void. One measurement never describes it, which is why a tape reading taken before the visit rarely matches the template. That is why the visit takes two or three hours. Boards taped or skimmed and finished, units fixed back to the wall and levelled off, and the appliances on site - the wall must be at its final thickness on template day, so no tiler or splashback fitter gets ahead of the worktop. Mixed ownership means the decision-maker is not always the person who lets us in, so it is worth being clear early about who signs the quote off. The template happens when the units are in, fixed and level, whoever is fitting them. No stone is cut from a plan.