Worktop design and quotation in Golders Green

Yes. Golders Green is on the patch, and the postcodes we work here are NW11. It is run from the Watford side, covering Hertfordshire & North London. Permit hours are what matters, not the permit itself, because a bay that frees up at six in the evening is no use for a template at ten. Where a bay suspension or a permit is needed, that is a real cost and it goes on the quote instead of appearing later. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

The lift is a small passenger car with a gate, and the alternative is a stone stair winding round the shaft with a turn at every half-landing. The building rather than the kitchen is what you are paying for here, so template, fabrication and fitting are broken out separately. You see it before you commit to anything. Kosher layouts must be agreed before templating because the meat and dairy split changes sink positions, drainer grooves and joint locations across the whole kitchen.

Mansion blocks with small original lifts, stone stairs and porters, plus permit parking that is full by mid-morning along the main roads. Houses off the side streets have driveways, but the mansion flats are the defining access problem. A car that takes 2.4m on the diagonal will not take a three-metre worktop however it is stood, and there is no trimming it on the landing. That is why the fitting line on a quote reflects manpower and time rather than square metres. You see that figure before we template, not after. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Yes. On the research for this patch it is the first of the three jobs listed, ahead of worktop installation and worktop fabrication. Quartz suits let property well: no sealing, no annual maintenance, and nothing an incoming tenant has to be told to look after. Comparing quotes only works when they itemise the same things, and this is where the differences usually hide. Material is the slab only, and it says so. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Material is the slab only, and it says so.

Galley runs are usually short enough to come out of a single slab, so the material band you choose does more to the total than the room shape does. It is the shape rather than the square metreage that moves the number, which is why two kitchens the same size quote differently. Shape first, area second. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. It is fabrication time rather than material, so it appears on the fabrication line and not in the square metre figure. Photographs are worth more than a plan here. Measure the internal lift car — width, depth and height — and photograph the stair turn and landing doors, then send those with the run lengths. Owner-occupied kitchens are usually being done once, which is why the edge profile, the vein direction and where a join falls are worth the conversation. The quote is written so it can be read by whoever is paying rather than only by whoever is standing in the kitchen. Every line has a reason next to it.