Worktop design and quotation in East Wickham

Yes. East Wickham is on the patch, and the postcodes we work here are DA16. It is run from the New Malden side, covering South West London & Surrey. A drive that shelves towards the house needs the van chocked and the trolley controlled, since a loaded A-frame gathers speed quickly on a slope. It sits in the fitting line as time on site rather than as anything to do with the stone. You are told before you commit to a date. We template in your kitchen and fit in your kitchen, so there is nothing to visit and nothing to collect.

Rear access through a garden or a shared path means long pieces can usually come in whole from the back. Templating, fabrication and fitting are the same day's work whether the kitchen is five square metres or eight, so on a small kitchen they are a larger share of the total, and one slab covers the lot, which makes the material band the main lever you actually control. Priced from the building, not from a rate card. Postwar units here are often 500mm deep rather than 600mm, so check before ordering standard-width worktop.

Quiet residential grid with front gardens, drives on the private housing and parking courts on the estate sections; vehicle access is easy throughout. Estate roads are often too tight for a long-wheelbase van to turn, so the carry starts a good deal further from the door than a map suggests. We price the carry from what you tell us about the route, so photographs of the approach are worth more to us than a floor plan. Nothing about it gets estimated after the fact. Tell us what the approach looks like when you book the template and it gets built into the day rather than discovered on it.

Not particularly, and it would be easy to pretend otherwise. What the research on this patch actually lists is worktop replacement, worktop fabrication and worktop templating. That is a statement about the local housing rather than about the work. It is quoted, cut and fitted exactly the same way here as anywhere else on the patch. A worktop replacement between tenancies is a single-day job by design, because the flat is not earning while it is empty. That changes what the quote should be compared against, because the shape of the job is not the same as a single family kitchen. Material is the slab only, and it says so. Landlord work is scheduled around void periods, so the whole thing is a fixed window and the template date matters as much as the fitting date. Everything is itemised: material, template, fabrication, fitting, each cut-out and each metre of upstand. Nothing payable until we template.

The catch with a galley is that both runs are seen end-on from the doorway, so any difference in overhang between the two reads immediately. Slab yield is worked out at quote stage, so if the layout forces a second slab you hear it before you commit rather than after. No installed rate per square metre, because it is not a real number. Material is £110-£550 per square metre supply only, and templating, fabrication and fitting are quoted on their own lines.

A notch around a boxed stack is machined with a radius at the internal corner, because a square inside corner there is exactly where a top will crack. Send photographs of every corner of the room and it gets priced properly first time. Photographs are worth more than a plan here. Send the run lengths plus a photo of every corner of the kitchen so we can spot boxed ducts, and tell us whether the sink is staying in the same position. Managed stock usually comes with its own rules about working hours, waste, and who is allowed on site. Material is quoted as a supply range and the labour lines separately, because an installed rate per square metre is not a real number. Nothing payable until template.